18g Enamel Tube Ozone Generator 30g Enamel Tube Ozone Generator 40g Enamel Tube Ozone Generator 60g Enamel Tube Ozone Generator 80g Enamel Tube Ozone Generator

2023 NEW! Durable 18g 30g 40g 60g 80g Enamel Tube Ozone Generator Water Cooled For Air and Water Purification

Features:

1. Enamel Electrodes:
1) Use enamel coating as internal electrode, stainless steel as external electrode, capacity of corona resistance and machinery anti-force capacity are stronger than glass, ceramic material.

2) Uniformity air gap between enamel coating internal electrode and stainless steel external electrode.

3) it produces high concentration ozone output.

4) It uses insulation materials for connections to prevent creepage.

2. Cooling way:
Extra big diameter water cooling tube, and air pump cooling.

3. Adjustable ozone output range: 20-100%.
Use high-frequency & Intelligent power supply inverse system, ozone output can be changed on demand to achieve accuracy control.

Installation:

How to connect high voltage cables:

Test Report:

When oxygen flow is low, the ozone concentration is high.

When oxygen flow is high, the ozone output is high.

That, if you want ozone concentration and ozone output are in something like inversely-proportional relationship.  

After Sales Service: 

We are responsible for shipping damages, and any product not working if installed properly. we can compensate it with payment back or send you new one/ones. But the prerequisite is that you raise up the problem within 7days after consignment. 

Packaging:

five-layercarton, make sure it is safe.

Attention: 

First of all. Please never touch the ozone generator (both power pack and the tube) in any way when it is working. There are high voltage, which is quite dangerous. when install it, please pay attention to the below  5 key points. 

1. Vertically installation to make sure there is surficient amount of water from the bottom to the top to better cool down the tube. the cooling water temeperature should be beween "-5 to +5" degree compared with the working environment temperature. otherwise, there would be condensate.

2. The feeding sources must be pure oxygen or dry and clean ambient air. if not, it will breakdown the inner enamel tube soon.

3. There must be 5cm distance beween high voltages themselves, and 5cm distance beween high votlage cable and power cable to avoid EMI.

4. Install a venturi with built-in anti-flow device, to prevent any water go back into the enemal tube, to avoid damges.

5. The casing must be insulating materials, such as plastic.

All in all, please read the manual carefully before installation, if meet any problems, please contact us timely for help. Never install it at your own mind, to avoid mistakes.