LikeWinter
40G/H Adjustable Quartz Tube Ozone Air Water Narrow Gap Ozone Tube
40G/H Adjustable Quartz Tube Ozone Air Water Narrow Gap Ozone Tube
Regular price
$572.11 CAD
Regular price
$1,122.15 CAD
Sale price
$572.11 CAD
Unit price
per
Shipping calculated at checkout.
Get it between -
Couldn't load pickup availability
Remarks:
We have updated our website, the total product price = ex-factory price + shipping cost, which will be more reasonable.
This will ensure that you can buy this product at the lowest price.
Since the shipping cost of each country is not the same, if we set the shipping cost as free shipping, it will cause you have to pay more.
.
When we send this goods to you, we will fill in the low product value for you, in order to avoid you paying expensive tariffs.
Maybe you will get your goods directly, maybe the local customs will ask you to assist in customs clearance and pay the customs duties. You can check and understand the local customs policies.
If your goods stay at the local customs for a long time (maybe the local customs or the local courier company will call you), please contact the local courier company and provide them with a tracking number in order to assist in customs clearance and take away your goods.
If you are unwilling to assist in customs clearance and pay customs duties, please do not order it.
.
Our test equipment:
AC voltage regulator, DC voltage regulator, voltage stabilizer, intelligent program-controlled frequency conversion power supply, electrical parameter meter, ozone concentration analyzer, oxygen cylinder, oxygen machine, air compressor, oil-water separator, pressure regulating valve, flow meter, ambient temperature and humidity meter, aging test bench...
AC200V-AC240V, we will set: AC240V 50HZ for you.
AC100V-AC130V, we will set: AC130V 60HZ for you.
If the local voltage or frequency is special, when you order our products, you can leave a message to us.
.
If you don’t have a PLC or ORP controller, please choose: 40G adjustable.
.
.
.
Patented product, high ozone concentration, smaller size, larger heat dissipation area, lower temperature rise, high efficiency, longer service life, built-in 316L stainless steel tube, add internal electrode heat sink for free.
.
.
.
Product picture: (When the product works, there is no electricity on the black radiator, which is very safe)
Product picture: (When the product works, there is no electricity on the black radiator, which is very safe)
.
.
.
.
.
.
.
.
.
.
.
.
Cooling fan:
Inner electrode cooling fan: DC12V 4cm 4028 high-speed cooling fan + 1A switching power supply (transformer), input voltage: AC100V-AC240V.
You can use M4 screw length 14cm to install and fix 2pcs 12cm cooling fan on the ozone tube heat sink. There are reserved mounting holes on the ozone tube. If you need the ozone tube with the cooling fan, please click here >>>
.
.
Installation requirements:
1. Ozone tube: You need to install it on the insulating board, away from the metal shell for more than 2cm. (If you install it on a metal shell, please connect an additional ground wire.)
2. Ozone PSU: You can use 9cm long screws to install the ozone PSU (ozone power supply) away from the ozone tube (metal shell or other electrical appliances) more than 8cm.
2. Ozone PSU: You can use 9cm long screws to install the ozone PSU (ozone power supply) away from the ozone tube (metal shell or other electrical appliances) more than 8cm.
3. The closest distance between the ozone PSU and the metal shell or other electrical appliances is 8cm.
4. The closest distance between 2pcs ozone PSU is 16cm.
5. Red high voltage wire: Away from the metal shell and other wires for more than 2cm.
5. Red high voltage wire: Away from the metal shell and other wires for more than 2cm.
6. You need a dry and clean air source or oxygen source.
7. You should push the thick red wire at the middle of the ozone tube and fix another wire on the radiator.
8. You need cooling fan to cool the ozone tube and the ozone PSU.
9. If you need to disinfect water, you can connect ozone output to air stone or venturi through the teflon tube.
8. You need cooling fan to cool the ozone tube and the ozone PSU.
9. If you need to disinfect water, you can connect ozone output to air stone or venturi through the teflon tube.
.
There is no need to distinguish between inlet and outlet.
Inlet: We recommend that you use 4*7mm silicone tube or 5*8mm PU tube.
Outlet: We recommend that you use 6*8mm Teflon tube.
If you need to change the connector, please contact us.
Inlet: We recommend that you use 4*7mm silicone tube or 5*8mm PU tube.
Outlet: We recommend that you use 6*8mm Teflon tube.
If you need to change the connector, please contact us.
When you get our products, you will get installation instructions, operation instructions and wiring diagrams.
If you still have any questions, you can contact us at any time.
If you still have any questions, you can contact us at any time.
.
.
High-end double air cooling ozone generator kit:
Ozone output: 30-40G/H
Maximum power: 300W
Optimal power: 270W
Air flow: ≤80L/min
Oxygen flow: ≤15L/min
.
